OSHA's Bloodborne Pathogens Standard (29 CFR 1910.1030) requires that contaminated sharps be placed as soon as feasible into accessible, closable, puncture-resistant, properly labeled containers located as close as possible to the point of use. Many state and local health codes also require or encourage secured sharps disposal points in restrooms and treatment areas — always confirm requirements with your local authority having jurisdiction. The ASI 0548-9 is a surface-mounted sharps disposal cabinet built from 18-gauge type-304 stainless steel, designed to house one BD Sharps Collector (model 305443) behind a tumbler-locked door. It mounts to any finished wall with four screws, installs in under 30 minutes, and coordinates with other ASI washroom equipment through a keyed-alike lock system. Total Restroom offers the 0548-9 with our Low Price Guarantee on ASI products.

• Material: 18-gauge type-304 stainless steel (alloy 18-8), welded construction
• Finish: Satin (all exposed surfaces)
• Dimensions: 13-3/4″ W × 19-1/16″ H × 5-1/4″ D (349 × 484 × 133 mm)
• Weight: 10.3 lb
• Mounting type: Surface-mounted with stainless steel SM collar (included)
• Mounting hardware: Four #10 screws (by others)
• Recommended install height: Per ASI's installation instructions and applicable ADA reach-range requirements; typically bottom of unit 36–38″ above finished floor
• Lock type: Tumbler lock, keyed alike to standard ASI washroom accessories
• Sharps container compatibility: BD Sharps Collector model 305443 (not included, sold separately)
• Door hinge: Full-length 3/16″ Ø stainless steel piano hinge, attached at bottom
• Biohazard labeling: Graphic biohazard label on door (included)
• Trim: 1″ wide, one-piece 18-gauge type-304 stainless steel, no miters or open seams
• Warranty: 1-year limited warranty from American Specialties, Inc.
• ASI MPN: 0548-9

KEY FEATURES

18-Gauge Type-304 Stainless Steel, Welded Construction This cabinet is built from the same commercial-grade stainless specified in healthcare and correctional facilities — 18-gauge type-304 (alloy 18-8) is corrosion-resistant, compatible with standard disinfectants, and doesn't dent or warp under the conditions of a busy restroom. All components are welded (not riveted or snapped together), which matters in high-traffic or vandalism-prone environments.

Tumbler Lock Keyed Alike to Other ASI Equipment The 0548-9 uses the same keyed-alike tumbler lock system as ASI's paper towel dispensers, soap dispensers, and other washroom accessories. That means one key for your maintenance staff to service the entire restroom — no separate key ring for the sharps cabinet.

Surface Mount with SM Collar — No Wall Cutout Required The included stainless steel surface-mount collar attaches to the cabinet before installation, so the unit goes on any finished wall with four #10 screws. No drywall cutting, no blocking, no rough-in required. That makes this the right choice for retrofit projects, tenant improvements, or any location where a recessed install isn't feasible.

Bottom-Hinged Door for Safe, Controlled Access The door is hinged at the bottom and drops open for container removal rather than swinging out to the side. This controlled opening prevents accidental tip-over of the sharps collector during servicing and keeps the access path clear and deliberate.

Coordinates Visually with ASI Washroom Systems The 0548-9 was designed in ASI's Traditional series to match the satin finish of their standard washroom accessory line — grab bars, soap dispensers, towel dispensers, toilet paper holders. If your facility is already ASI-equipped, this cabinet integrates cleanly without standing out as a clinical afterthought.

WHICH VERSION IS RIGHT FOR YOU?

0548-9 (this unit) — Surface Mounted: Installs directly onto the finished wall surface with the included SM collar. No wall opening required. Best for retrofit installs, concrete or CMU walls, existing facilities where drywall cutting isn't practical, or anywhere blocking wasn't roughed in.

0548 — Recessed: Mounts flush into the wall for a cleaner, lower-profile look. Requires a wall opening and, in most cases, backing or blocking in the wall cavity. Preferred for new construction or major renovation where the wall assembly can accommodate the recess. Both models accept the same BD 305443 sharps collector and use the same keyed-alike lock.

Bottom line: If you're retrofitting an existing restroom or don't know what's behind the wall, choose the 0548-9. If you're building out new or doing a full renovation, the recessed 0548 gives a cleaner finished appearance.

HOW MANY DO YOU NEED?

Quantity depends on your facility type and usage volume rather than a fixed per-stall rule:

• Single-restroom clinics, dental offices, dialysis centers: Typically one unit per restroom, positioned near the sink or treatment area.
• Multi-stall healthcare restrooms: One cabinet per restroom is standard for general use; higher-acuity settings (insulin-dependent patients, infusion centers) may require one per stall or per exam room.
• Correctional facilities and public transit: Facilities with needle exchange programs or high-risk populations often require one unit per accessible restroom on every floor.
• General commercial/public: One per gender-designated or all-gender restroom if the facility serves a population with medical disposal needs (dialysis patients, insulin users, etc.).

If you're unsure of the right quantity for a multi-site or large project, our project managers can help — same-day response on quotes.

FAQ

Q: Does the sharps container come included with the ASI 0548-9? A: No — the cabinet is sold without a sharps collector. It is specifically designed to accommodate the Becton, Dickinson and Company (BD) Sharps Collector model 305443, which must be purchased separately through a medical supply distributor. The cabinet provides the secure housing, mounting, and locked access; the collector handles the sharps themselves.

Q: What regulations require sharps disposal cabinets in restrooms? A: OSHA's Bloodborne Pathogens Standard (29 CFR 1910.1030) requires employers in healthcare and related settings to provide puncture-resistant sharps containers in accessible locations. Many states and municipalities have extended similar requirements to public restrooms, transit facilities, and correctional institutions. Local health departments may have additional requirements — consult your AHJ (authority having jurisdiction) for location-specific guidance.

Q: Can I use a different brand of sharps collector in the 0548-9? A: ASI specifies the BD model 305443 as the compatible collector. Other collectors may fit physically, but ASI's documentation and warranty are written around the BD model. Using a non-specified collector could affect how the unit functions and may impact compliance documentation. Verify fit with your compliance officer before substituting.

Q: What's the difference between the 0548-9 (surface) and the 0548 (recessed)? A: The 0548-9 mounts directly onto the finished wall surface using the included stainless steel SM collar — no wall cutout required. The 0548 recesses into the wall for a flush, lower-profile appearance, but requires a wall opening and typically needs backing or blocking in the wall cavity. Both models use the same internal components, lock system, and accept the same BD collector.

Q: How high should the ASI 0548-9 be installed? A: Follow ASI's installation instructions and any applicable ADA reach-range requirements for your facility type. Most installations place the bottom of the unit approximately 36–38″ above the finished floor for general accessibility. If your facility has specific compliance requirements for medical equipment placement, confirm the exact height with your accessibility consultant or AHJ.

Q: Is the lock on the 0548-9 the same as other ASI dispensers in my restroom? A: Yes. The 0548-9 uses a tumbler lock that is keyed alike to other ASI washroom accessories — soap dispensers, paper towel dispensers, toilet tissue dispensers, and similar products. One service key covers the entire ASI-equipped restroom.